Providing a voice for the home appliance industry in Europe – the European Committee of Domestic Equipment Manufacturers

A glimpse into the circularity of home appliances, based on facts

2018/01/25

CECED publishes a Material Flows Report


Annually, the home appliance industry provides EU citizens and households with 1 billion small and large home appliances. To produce them, the industry uses 6 million tonnes of raw materials, comprising of 3 million tonnes of steel and stainless steel, 1,1 million tonnes of plastics and more than half a million tonnes of copper, aluminium, glass and concrete. While these volumes are significant,
they are only a fraction of global material consumption. The European home appliance market represents a share of global material consumption ranging from 0,2% for steel to 0,5 % for plastics and 1,2% for copper.

 

Today, we know this and a lot more of what happens to these raw materials thanks to the first of its kind study, analysing the material flows of the home appliance industry – www.materialflows.eu

 

Together with the Sustainable Cycles specialised programme of the United Nations University (UNU-VIE SCYCLE), the home appliance association in Europe, CECED provides an overview of the materials used by the industry in the production of appliances, the stock during use, the materials collected and recycled and then recovered and passed back into the production of appliances or into other manufacturing circles.


“We, the home appliance industry in Europe, believe that what goes around should come around and also know that every fruitful discussion should be based on facts,” said CECED’s Director-General, Paolo Falcioni. “The result of investing more than €1.4 billion in research and development and creating nearly 1 million jobs is clear. The home appliance industry is circular from the outset, tackling the challenges from the production of appliances to material recovery at their end of life”, he also added.


Nearly 8 billion installed products in homes contain more than 30 million tonnes of steel, 12 million tonnes of plastics, and a few million tonnes of non-ferrous metals and glass. These appliances represent a vital source of materials for the EU, embedded in our daily life. Home appliance material composition is the main driver for the treatment and recovery of products at the end of life. This means that when appliances do finally come to the end of their useful life, they are discarded, collected and treated and the materials are recovered for a second life.


The steel, copper, aluminium, plastics and the rest of the materials of the appliances, that have made it to the recycling facilities, come back to production processes in both our sector and other industries, helping to close material loops. Industry-led recycling, mainly via take- back schemes set up by industry, is now well established and today collects and treats about 1,7 million tonnes annually across the EU. But this volume is nowhere near the estimated annual total of 5 million tonnes of discarded appliances. Because of the high metal content and intrinsic economic value of large appliances, and the historic presence of the recycling industry, already long before EU WEEE legislation, market dynamics make sure that a large share of all electronic waste is handled by other actors outside the industry recycling schemes. While some country level information can be found, no complete data exists on this activity at EU level and CECED recommends policy makers carry out an extensive EU-wide assessment to identify the fate of flows not handled by the industry.


Other challenges also remain. Korrina Hegarty, CECED’s Environment Policy Director, explained that still, too few small appliances are collected, many of which end up in the waste bin. “These are products with low metal content and consumer awareness about the need to bring such appliances to proper
collection points is low. We also need to better ensure that all collected appliances, large and small, inside and outside producer recycling schemes, are treated to the same high standards”, she said.


The full circularity of the economy goes beyond what economic actors alone can do: it embraces all our society and is a societal challenge. Contributing to a Circular Society is only possible when we have a better understanding of ourselves and the Material Flows study is a good start.


Tell us what you think by using #MaterialFlows.

You can download the press release here

For more information, please contact:
Diana Yordanova | Communication Manager | CECED
Tel: +32 (0)2 738 78 22 | diana.yordanova@ceced.eu | @CECED_Europe | #CECED60